Omron CJ2H-CPU6*-EIP Series - Page 50

7
．
EtherNet/IP Connection Procedure
47
7.4.5. Transferring the Tag Data Link Parameters
Transfer the set tag data link parameters to PLC.
1
Right-click the device icon of
node 1 in the Network
Configuration Pane and select
Parameter - Download.
2
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
3
The tag data link parameters are
downloaded from Network
Configurator to PLC.
4
The dialog box on the right is
displayed. Check the contents
and click OK.