77
3-2. User Default Settings
HR Synchronized Tone
A beep sound can be made at each R wave of ECG during measurement. Select whether or not
this beep sound is made.
Measurement Sensors
Set default settings for attachment of sensors on the patient. Specify settings for ECG, PCG.
Measurement Sites
Set default settings for attachment of cuffs on the patient.
• Cuffs are normally attached on both brachia and both ankles.
• If a shunt is placed in an upper arm for hemodialysis, do not attach an arm cuff to or perform
measurement on that brachium.
• Measurement cannot be performed with both ankle cuffs and toe cuffs attached.
Synchro Measurement
Set the default setting for "synchro measurement".
Selections Description
ON Make a beep sound
OFF Do not make a beep sound
Selections Description
ON Attached.
OFF Not attached.
Selections Description
RIGHT BRACHIUM /
LEFT BRACHIUM
ON Arm cuff attached.
OFF Arm cuff not attached.
RIGHT LEG /
LEFT LEG
ANKLE Ankle cuff attached.
OFF Ankle cuff not attached.
Selections Description
ON Perform synchro measurement.
OFF Do not perform synchro measurement.
BP-203RPE3(A).fm 77 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
