Omron CP1E-E14SDR-A - Related Manuals

25
CP1E CPU Unit Hardware User’s Manual(W479)
Related Manuals
The following manuals are related to the CP1E. Use them together with this manual.
Manual name Cat. No. Model numbers Application Contents
SYSMAC CP Series
CP1E CPU Unit Hard-
ware User’s Manual
(this manual)
W479 CP1E-ESD-
CP1E-NSD-
CP1E-ED-
CP1E-ND-
CP1E-NAD-
To learn the hard-
ware specifications
of the CP1E PLCs
Describes the following information for CP1E
PLCs.
• Overview and features
• Basic system configuration
• Part names and functions
• Installation and settings
• Troubleshooting
Use this manual together with the CP1E CPU Unit Software User’s
Manual (Cat. No. W480) and Instructions Reference Manual (Cat. No.
W483).
SYSMAC CP Series
CP1E CPU Unit Soft-
ware User’s Manual
W480 CP1E-ESD-
CP1E-NSD-
CP1E-ED-
CP1E-ND-
CP1E-NAD-
To learn the software
specifications of the
CP1E PLCs
Describes the following information for CP1E
PLCs.
• CPU Unit operation
• Internal memory
• Programming
• Settings
• CPU Unit built-in functions
• Interrupts
• High-speed counter inputs
• Pulse outputs
• Serial communications
• Analog I/O function
• Other functions
Use this manual together with the CP1E CPU Unit Hardware User’s
Manual (Cat. No. W479) and Instructions Reference Manual (Cat. No.
W483).
SYSMAC CP Series
CP1E CPU Unit Instruc-
tions Reference Manual
W483 CP1E-ESD-
CP1E-NSD-
CP1E-ED-
CP1E-ND-
CP1E-NAD-
To learn program-
ming instructions in
detail
Describes each programming instruction in
detail.
When programming, use this manual together
with the CP1E CPU Unit Software User’s Man-
ual (Cat. No. W480).
CS/CJ/CP/NSJ Series
Communications Com-
mands Reference Man-
ual
W342 CS1G/H-CPUH
CS1G/H-CPU-V1
CS1D-CPUH
CS1D-CPUS
CS1W-SCU-V1
CS1W-SCB-V1
CJ1G/H-CPUH
CJ1G-CPUP
CJ1M-CPU
CJ1G-CPU
CJ1W-SCU-V1
To learn communica-
tions commands for
CS/CJ/CP/NSJ-
series Controllers in
detail
Describes
1) C-mode commands and
2) FINS commands in detail.
Read this manual for details on C-mode and
FINS commands addressed to CPU Units.
Note This manual describes commands addressed to CPU Units. It
does not cover commands addressed to other Units or ports (e.g.,
serial communications ports on CPU Units, communications ports
on Serial Communications Units/Boards, and other Communica-
tions Units).
SYSMAC CP Series
CP1L/CP1E CPU Unit
Introduction Manual
W461 CP1L-L10D-
CP1L-L14D-
CP1L-L20D-
CP1L-M30D-
CP1L-M40D-
CP1L-M60D-
CP1E-ED-
CP1E-ND-
CP1E-NAD-
To learn the basic
setup methods of the
CP1L/CP1E PLCs
Describes the following information for
CP1L/CP1E PLCs.
• Basic configuration and component names
• Mounting and wiring
• Programming, data transfer, and debugging
using the CX-Programmer
• Application program examples
CX-Simulator Operation
Manual
W366
CXONE-ALC-V4/
ALD-V4
Operating procedures
for CX-Simulator
Simulation Support
Software for Windows
computersUsing
simulation in the
CX-Programmer with
CX-Programmer
Describes the operating procedures for the
CX-Simulator.