Omron CP1E-E14SDR-A - Connecting Expansion I;O Units and Expansion Units

5 Installation and Wiring
5-12
CP1E CPU Unit Hardware User’s Manual(W479)
This section describes how to connect Expansion I/O Units and Expansion Units.
1 Remove the cover from the CPU Unit’s or the Expansion I/O Unit’s expansion connector. Use a
flat-head screwdriver to remove the cover from the Expansion I/O Connector.
2 Insert the Expansion I/O Unit’s connecting cable into the CPU Unit’s or the Expansion I/O Unit’s
expansion connector.
3 Attach the cover to the CPU Unit’s or the Expansion I/O Unit’s expansion connector.
5-2-4 Connecting Expansion I/O Units and Expansion Units
Connection Methods

Remove
Expansion Connector
Cover
IN
OUT

Insert

Attach
IN
OUT