Omron CP1E-E14SDR-A - Optional Products

2-9
2 Basic System Configuration and Devices
CP1E CPU Unit Hardware User’s Manual(W479)
2-2 CPU Units
2
2-2-2 Optional Products
Note 1 The CP1W-ME05M Memory Cassette, CP1W-DAM01 LCD Option Board, and CP1W-CIF41 Ethernet Option Board
version 1.0 cannot be used with the CP1E CPU Unit.
2 Serial Option Boards cannot be used with the NS(1)-type CPU Unit.
NA-type CPU Units
Name and appearance Model number
Number of built-in I/O
points
Built-in
analog
Power
supply
specifica-
tions
Output
type
Program
capacity
DM Area
capacity
Current
consumption
Weight
Total
Number
of
inputs
Number
of
outputs
AD DA
5
VDC
24
VDC
CPU Unit with 20 I/O
Points and Built-in Analog
CP1E-NA20DR-A 20 12 8 2 1 AC power
supply 100
to 240 VAC
Relays 8K steps
8K words 0.18A 0.11A 680g
max.
CP1E-NA20DT-D DC power
supply
24VDC
Sinking
transistor
0.23A 0.09A 500g
max.
CP1E-NA20DT1-D Sourcing
transistor
0.23A 0.09A 500g
max.
2-2-2 Optional Products
Optional Products for CPU Units
Name and appearance Model number Applications
Current
consumption
Weight
5 VDC 24 VDC
RS-232C Option Board CP1W-CIF01 Mounted in the option slot of an N30/40/60 or
NA20 CPU Unit and can be used as an RS-
232C port.
Includ-
ing in
CPU
− Includ-
ing in
CPU
Non-isolated RS-422A/485
Option Board
CP1W-CIF11 Mounted in the option slot of an N30/40/60 or
NA20 CPU Unit and can be used as an RS-
422A/485 port.
Maximum transmission distance: 50 m
Includ-
ing in
CPU
−
Includ-
ing in
CPU
Isolated RS-422A/485 Option
Board
CP1W-CIF12 Mounted in the option slot of an N30/40/60 or
NA20 CPU Unit and can be used as an RS-
422A/485 port.
Maximum transmission distance: 500 m
0.075A − 30g
Ethernet Option Board CP1W-CIF41
(version 2.0 or
higher)
Mounted in the option slot of an N30/40/60 or
NA20 CPU Unit and can be used as an Ether-
net port.
Maximum transmission distance: 100 m (dis-
tance between the hub and the node)
0.130A − 23g
Battery CP1W-BAT01 Mounted in an N/NA(S)-type CPU Unit.
Mount the Battery to an N/NA(S)-type
CPU Unit if
data in the following areas need to
be retained after a power interruption.
• DM Area (D) (excluding words backed up to
the EEPROM using the DM backup func-
tion)
• Holding Area (H)
• Counter Present Values and Completion
Flags (C)
• Auxiliary Area related to clock function (A)
A Battery cannot be mounted to an E(S)-
type CPU Unit.
−−−
E
COMM
COMM
COMM
IP ADDRESS:
SUBNET MASK:
COMMERR
10BASE-T
100BASE-TX