Omron CP1E-E14SDR-A - Page 81

3 Part Names and Functions
3-14
CP1E CPU Unit Hardware User’s Manual(W479)
*1 The bits that can be used depend on the model of CPU Unit.
*2 The response time is the delay caused by hardware. The delay set in the PLC Setup (0 to 32 ms, default: 8 ms)
for a normal input must be added to this value.
CP1E-DR-
Output Specifications for Relay Outputs
Item Specification
Maximum switching capacity 2 A 250 VAC (cosφ= 1)
2 A 24 VDC (4 A/common)
Minimum switching capacity 10 mA 5 VDC
Service life of
relay
Electrical Resistive
load
200,000 operations (24 VDC)
Inductive
load
70,000 operations (250 VAC, cosφ = 0.4)
Mechanical 20,000,000 operations
ON response time 15 ms max.
OFF response time 15 ms max.
Circuit configuration
ON
OFF
ON
OFF
ON
OFF
T1 T2 T3 T4
T1, T2, T3, T4: 2.5 µs min.
90%
50%
10%
90%
50%
10%
90%
50%
10%
2.5µs
min.
2.5µs
min.
20.0µs min.
10.0µs min.
Up/down input mode
Differential phase mode
Pulse plus direction input mode,
Increment mode
N/NA(S)-type: 0.00/0.01 N/NA(S)-type: 0.00/0.01
ON
OFF
ON
OFF
ON
OFF
T1 T2 T3 T4
T1, T2, T3, T4: 50 µs min.
90%
50%
10%
90%
50%
10%
90%
50%
10%
50µs
min.
50µs
min.
200µs min.
100µs min.
E(S)-type: 0.00 to 0.07
N/NA(S)-type: 0.02 to 0.07
E(S)-type: 0.00 to 0.03
N/NA(S)-type: 0.02/0.03
Output indicator
Internal
circuits
COM
OUT
OUT
250 VAC, 2A,
24 VDC, 2 A
max.