EasyManua.ls Logo

Omron CP1H-X40D - Page 427

Omron CP1H-X40D
810 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
393
Analog Input Units Section 7-2
Analog Input Signal
Ranges
Analog input data is digitally converted according to the input signal range as
shown below.
Note When the input exceeds the specified range, the A/D conversion data will be
fixed at either the lower limit or upper limit.
Analog Input Signal
Ranges
10 to 10 V Inputs
When the resolution is 1/6,000, the –10 to 10 V range corresponds to hexa-
decimal values F448 to 0BB8 (–3,000 to 3,000). The range of data that can be
converted is F31C to 0CE4 hex (–3,300 to 3,300).
A negative voltage is expressed as two’s complement.
When the resolution is 1/12,000, the –10 to 10 V range corresponds to hexa-
decimal values E890 to 1770 (–6,000 to 6,000). The entire data range is E638
to 19C8 hex (–6,600 to 6,600).
A negative voltage is expressed as a two’s complement.
Item CP1W-AD041 CP1W-AD042
Voltage Input Current Input Voltage Input Current Input
Number of inputs 4 inputs (4 words allocated)
Input signal range 0 to 5 VDC,
1 to 5 VDC,
0 to 10 VDC,
or –10 to 10 VDC
0 to 20 mA
or 4 to 20 mA
0 to 5 VDC,
1 to 5 VDC,
0 to 10 VDC,
or –10 to 10 VDC
0 to 20 mA
or 4 to 20 mA
Max. rated input ±15 V ±30 mA ±15 V ±30 mA
External input impedance 1 M min. Approx. 250 1 M min. Approx. 250
Resolution 1/6000 (full scale) 1/12000 (full scale)
Overall accuracy 25°C 0.3% full scale 0.4% full scale 0.2% full scale 0.3% full scale
0 to 55°C 0.6% full scale 0.8% full scale 0.5% full scale 0.7% full scale
A/D conversion data
16-bit binary (4-digit hexadecimal)
Full scale for –10 to 10 V: F448 to 0BB8 Hex
Full scale for other ranges: 0000 to 1770 Hex
16-bit binary (4-digit hexadecimal)
Full scale for –10 to 10 V: E890 to 1770 Hex
Full scale for other ranges: 0000 to 2EE0 Hex
Averaging function Supported (Set in output words n+1 and n+2.)
Open-circuit detection function Supported
Conversion time 2 ms/point (8 ms/all points) 1 ms/point (4 ms/all points)
Isolation method Photocoupler isolation between analog I/O terminals and internal circuits. No isolation
between analog I/O signals.
Current consumption 5 VDC: 100 mA max.; 24 VDC: 90 mA max. 5 VDC: 100 mA max.; 24 VDC: 50 mA max.
0 V 10 V
11 V
11 V
10 V
Converted data
Hexadecimal (Decimal)
0CE4 (3300)
0BB8 (3000)
0000 (0)
F448 (3000)
F31C (3300)

Table of Contents

Related product manuals