Omron CS1W-ETN01 User Manual

4-2SectionCPU Bus Unit System Setup
47
Error Log in User Mail
Specify whether or not all error log information is to be added to mail contents
when mail is sent by turning ON the Mail Send Switch in the CPU Unit’s I/O
Memory. (Refer to Mail Send Switch in 2-2 CIO Area Allocations.)
Setting Meaning
Not selected (Default) Error log information not included in user mail.
Selected Error log information included in user mail.
Status in User Mail
Specify whether or not status information is to be added to mail contents when
mail is sent by turning ON the Mail Send Switch in the CPU Unit’s I/O Memory.
(Refer to Mail Send Switch) in 2-2 CIO Area Allocations.)
Setting Meaning
Not selected (Default) Status information not included in user mail.
Selected Status information included in user mail.
Sending Mail for Errors
Specify whether or not mail is to be sent to a preset mail address whenever an
error is registered in the error log. The following types of data can be specified to
be sent as mail.
• User Data
(Refer to Sending User Data for Errors below.)
• Error Log Information
(Refer to Sending Error Log Information for Errors below.)
• Status Information
(Refer to Sending Status Information for Errors below.)
If none of these types of data is selected, mail will not be sent even if the setting is
made for mail to be sent whenever an error is registered.
Setting Meaning
Not selected (Default) Mail not sent when error is registered in error log.
Selected Mail not sent when error is registered in error log.
Sending User Data for Errors
Specify whether or not user data is to be added to mail contents when mail is
sent whenever an error is registered to the error log.
Setting Meaning
Not selected (Default) User data not included in mail when error is registered to
error log.
Selected User data included in mail when error is registered to
error log.
Sending Error Log Information for Errors
Specify whether or not all error log information is to be added to mail contents
when mail is sent whenever an error is registered to the error log.
Setting Meaning
Not selected (Default) Error log information not included in mail when error is
registered to error log.
Selected Error log information included in mail when error is
registered to error log.

Omron CS1W-ETN01 Specifications

General

Brand	Omron
Model	CS1W-ETN01
Category	Controller
Language	English