Omron CS1W-ETN01 User Manual

4-2SectionCPU Bus Unit System Setup
48
Sending Status Information for Errors
Specify whether or not status information is to be added to mail contents when
mail is sent whenever an error is registered to the error log.
Setting Meaning
Not selected (Default) Status information not included in mail when error is
registered to error log.
Selected Status information included in mail when error is
registered to error log.
Periodic Mail
Specify whether or not mail is to be sent at the time intervals set for the mail inter-
val in the mail settings. The following types of data can be specified to be sent as
mail.
• User data
(Refer to Periodic Mail for User Data below.)
• Error log information
(Refer to Perio
dic Mail for Error Log Information below.)
• Status information
(Refer to Periodic Mail for Status Information.)
If none of these types of data is selected, mail will not be sent even if the setting is
made for mail to be sent whenever an error is registered.
Setting Meaning
Not selected (Default) Mail is not sent periodically.
Selected Mail is sent periodically.
Mail Interval
When mail is sent periodically, it is sent at the time interval that is set here. The
setting range is 1 to 1,440, in units of 10 seconds, so the mail can be sent at inter-
vals of from once every 10 seconds to once every 10 days. This setting is only
enabled when the periodic mail setting (see above) is selected.
If the mail interval is set to 0, then mail will not be sent periodically. If it is set to a
value greater than 1,440, it will be processed as 1,440 (10 days).
The default setting is 0 (mail not sent periodically).
Periodic Mail for User Data
Specify whether or not user data is to be added to mail contents when mail is
sent periodically. The user data is ASCII data stored with the CPU Unit’s I/O
memory address set for the mail function’s “user-created mail data address” at
the beginning. (When user data is sent, 1,024 bytes or the data up to the null
code (00 Hex) is transmitted.)
Setting Meaning
Not selected (Default) User data not included in periodic mail.
Selected User data included in periodic mail.
Periodic Mail for Error Log Information
Specify whether or not all error log information (64 records max.) is to be added
to mail contents when mail is sent periodically.
Setting Meaning
Not selected (Default) Error log information not included in periodic mail.
Selected Error log information included in periodic mail.

Omron CS1W-ETN01 Specifications

General

Brand	Omron
Model	CS1W-ETN01
Category	Controller
Language	English