4-2SectionCPU Bus Unit System Setup
49
Periodic Mail for Status Information
Specify whether or not status information is to be added to mail contents when
mail is sent periodically.
Setting Meaning
Not selected (Default) Status information not included in periodic mail.
Selected Status information included in periodic mail.
Specify, by area classification and beginning word address, the CPU Unit’s
memory address for the data (user-created information) to be transmitted when
data is sent by user request. The default setting is for no address to be set.
In 50 or fewer characters, specify the mail address to be entered in the “From”
field in the mail.
In 50 or fewer characters, specify the address to which the mail is to be sent.
Specify the IP address of the mail server (i.e., the SMTP server address). The
setting range is 0.0.0.0 to 255.255.255.255. The default is 0.0.0.0 (nothing set).
User-created Mail Data
Address
Local Mail Address
Destination Mail Address
SMTP Server Address
To Next Page
Loading...
