xi
About this Manual:
This manual describes the CX-Programmer operations that are related to the function block functions
and Structured Text (ST) functions. The function block and structure text functionality of CX-Program-
mer Ver. 8.1 is supported by CJ2H CPU Units, by CS1-H, CJ1-H, and CJ1M CPU Units with unit ver-
sion 3.0 or later, by CP-series CPU Units, and by NSJ-series and FQM1-series Controllers.
Some function block and structure text functionality, however, is supported only by CJ2H CPU Units, by
CS1-H, CJ1-H, and CJ1M CPU Units with unit version 4.0 or later.
For details, refer to 1-6 Version Upgrade Information.
For information on functionality other than function blocks and structure text, refer to the following man-
uals.
• CX-Programmer
: CX-Programmer Operation Manual (W446) and CX-Programmer Operation Manual: SFC (W469)
• CPU Unit
: The operation manuals for the CS-series, CJ-series, CP-series, and NSJ-series Controllers
CX-Programmer Ver. 8.1 Manuals
Name Cat. No. Contents
SYSMAC WS02-CXPC1-V8
CX-Programmer Ver. 8.1 Operation Manual
Function Blocks/Structured Text
W447
(this
manual)
Explains how to use the CX-Programmer Ver. 8.1 software’s
function block and structured text functions. For explanations
of other shared CX-Programmer functions, refer to the CX-
Programmer Operation Manual (W446).
SYSMAC WS02-CXPC1-V8
CX-Programmer Operation Manual
W446 Provides information on how to use the CX-Programmer for
all functionality except for function blocks.
SYSMAC WS02-CXPC1-V8
CX-Programmer Operation Manual: SFC
W469 Explains how to use the SFC programming functions. For
explanations of other shared CX-Programmer functions, refer
to the CX-Programmer Operation Manual (W446).
CX-Net Operation Manual W362 Information on setting up networks, such as setting data links,
routing tables, and unit settings.
SYSMAC CXONE-AL
@@C-V3
SYSMAC CXONE-AL
@@D-V3
CX-Integrator Operation Manual
W445 Describes the operating procedures for the CX-Integrator.
To Next Page
Loading...
Need help?
General