Omron E3X-DA-N - Typical Operating Range; Excess Gain Ratio vs. Distance (Typical); Sensing Distance vs. Operating Range; Differential Travel vs. Sensing Distance

E3X-DA-N
E3X-DA-N
13
J OPERATING RANGE (TYPICAL)
With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.)
E32-DC200
(Reflective)
E32-D33
(Reflective)
E32-L25L
(Convergent Reflective)
Distance Y (mm)
High speed
Long distance
Standard
Distance Y (mm)
High speed
Standard
Long distance
Distance Y (mm)
Distance X (mm)Distance X (mm)Distance X (mm)
J EXCESS GAIN RATIO VS. DISTANCE (TYPICAL)
With standard sensing object. At max. sensitivity.
Standard
E32-TC200
(Through-beam)
E32-DC200
(Reflective)
E32-D21L
(Reflective)
Excess gain ratio
Long distance
High speed
Distance (m)
Long distance
Standard
High speed
Distance (mm)
Long distance
Standard
High speed
Distance (mm)
Excess gain ratio Excess gain ratio
Oper-
ating
level
Oper-
ating
level
Oper-
ating
level
Sensing Distance vs.
Operating Range
E32-DC200 (Reflective)
Differential Travel vs.
Sensing Distance
E32-D11L (Reflective)
Repeat Accuracy vs.
Sensing Distance
E32-DC200 (Reflective)
Distance Y (mm)
0.1-dia.
copper
wire
0.02-dia.
copper
wire
0.4-dia.
copper wire
Distance X (mm)
Standard
High
speed
Long
distance
Differential travel (mm)
Distance Differential travel
Distance (mm)
High
speed
Long
distance
Standard
Repeat accuracy
Sensing object: White paper
(µm)
Sensing object: White paper
Distance (mm)