Omron E3X-MDA - Fiber Units with Reflective Sensors

E3X-MDA Super Dual Fiber Sensors 11
■ Fiber Units with Reflective Sensors
Note 1. Indicates models that allow free cutting. Models without this mark do not allow free cutting.
2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing dis-
tance and sensitivity set to optimum values.
3. When set to the maximum sensitivity setting, internal light reflection may cause the sensor to detect incident light. In such case, use adjust
the threshold either manually or using teaching.
Long-distance Fiber Units
* Values are sensed for white paper (standard sensing object).
General-purpose Fiber Units
* Values are sensed for white paper (standard sensing object).
Features Appearance Applicable
Amplifier Unit
Sensing distance (mm)* Standard object
(min. sensing
object: Gold
wire)
Model Permissi-
ble bend-
ing radius
M6 E3X-MDA 500
×500
(0.005-mm dia.)
E32-D11L 25 mm
3-mm dia.; small di-
ameter
E3X-MDA 300
×300
(0.005-mm dia.)
E32-D12
M4 E3X-MDA 200
×200
(0.005-mm dia.)
E32-D21L 10 mm
3-mm dia.; small di-
ameter
E3X-MDA E32-D22L
Square head, su-
per-long distance
E3X-MDA 300
×300 E32-D16 4 mm
M6 screw
400
270
110
3-mm dia.
230
160
70
M4 screw
130
85
35
3-mm dia.
130
85
35
17.5 mm
40 to 490
40 to 600
40 to 240
Features Appearance Applicable
Amplifier Unit
Sensing distance (mm)* Standard object
(min. sensing
object: Gold
wire)
Model Permissi-
ble bend-
ing radius
M6 E3X-MDA 400
×400
(0.005-mm dia.)
E32-DC200 25 mm
M6 E3X-MDA 300
×300
(0.005-mm dia.)
E32-D11R 1 mm
M6
Fiber sheath mate-
rial: fluororesin
E3X-MDA E32-D11U 4 mm
3-mm dia. E3X-MDA E32-D12R 1 mm
M3; small diameter
E3X-MDA 100
×100
(0.005-mm dia.)
E32-DC200E 10 mm
M3; small diameter
E3X-MDA 50
×50
(0.005-mm dia.)
E32-D21R 1 mm
3-mm dia.; small di-
ameter
E3X-MDA E32-D22R
M6 Screw
300
210
90
M6 screw
300
170
50
M6 scre
w
170
125
50
3-mm dia.
170
120
50
M3 screw
80
55
22
M3 screw
30
22
8
3-mm dia.
30
22
8