3 Part Names and Basic Procedures
3 - 14
E5@C-T Digital Temperature Controllers User’s Manual (H185)
3-4 Procedures after Turning ON the
Power Supply
The basic flow of operations after you turn ON the power supply is shown below.
3-4-1 Basic Flow of Operations
1. Turn ON the power supply.
↓
2. Set the input type.
↓
3. Set the control method.
↓
4. Make program-related settings.
↓
5. Set the alarm type.
↓
6. Set the programs.
↓
7. Start program operation (Run).
To Next Page
Loading...
