Omron E5AC-T

3 Part Names and Basic Procedures
3 - 24
E5@C-T Digital Temperature Controllers User’s Manual (H185)
7 Start program operation (run).
Here, you can set the input type, alarm type, control method, programs, and alarm set values.
Refer to Section 4 Basic Operation and Section 5 Advanced Operations for individual settings, such
as the PID constant settings and HB/HS alarms.
40
25
40
25
run
r-r
Operation is started and the RST indicator goes out.
OR
Operation Level
Operation Level
Press U Key.
Press M (Mode) Key
several times.
Press M (Mode) and
D Keys simultane-
ously for at least 1 s.
r-r (R-R): Set the Program
Start parameter (Run/Reset)
to run.