xxvi
* A 2-level display is set when shipped from the factory.
A 3-level display is activated if parameters are initialized.
Inputs --- Square root extraction (for models with ana-
log inputs)
Outputs --- Control output ON/OFF count alarm
--- MV change rate limiter
Controls --- 40% AT
--- Automatic cooling coefficient adjustment for
heating/cooling control
Alarms --- PV rate of change alarm
--- OC alarm (only for models with heater burn-
out detection)
Other --- Logic operations
--- Inverting direct/reverse operation using
event inputs or communications commands
Previous models Upgraded models
To Next Page
Loading...
