Omron FQ2-S Series User Manual

Command Control
268
FQ2-S/CH User’s Manual
for Communications Settings
Execute Measurement
This command executes one measurement.
If data output is not set, only the measurement is performed.
If data output is set, the measurement is performed and the result is returned as response data.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Set the data output to output measurement results.
If data output is not set, only the command response is output.
Setting the Data to Output Automatically after Measurements: p. 169
Measurement result The measurement result is output as the response when data output is set.
The measurement result is not output when data output is not set.
Setting the Data to Output Automatically after Measurements: p. 169
Note
ASME CR UR E
Delimiter
CR M
Delimiter
or
CR
Measurement
result
CR OK
Delimiter
CR ER
Delimiter
FQ2-S_CH_comm.book 268 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English