Command Control
270
FQ2-S/CH User’s Manual
for Communications Settings
POSITIONTEACH or PT
Perform Teaching (Filter/Position Compensation Item)
This command updates reference data for the specified image adjustment processing item (filter item/position
compensation item).
The model data is also updated in image adjustment processing items that have model data.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Filter item/position com-
pensation item number
Specifies the item number of the filter item or position compensation item that teaching
will be performed on. (0 to 7)
PO
CR
SI EACHT ION T
or
Delimiter
Delimiter
CR
PT
Filter item/position compensation
item number (1 digit max.)
Filter item/
position compensation
item number (1 digit max.)
Space
(0x20)
Space
(0x20)
FQ2-S_CH_comm.book 270 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
