Omron FQ2-S Series - Page 284

Command Control
282
FQ2-S/CH User’s Manual
for Communications Settings
ERRGET
Acquire Error Information
This command acquires the latest error code from the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Error code Returns the latest error code. If there is no error history, the response is 00000000.
Section 8 Troubleshooting
in Vision Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
ER CR RG TE
Command
Delimiter
0 0 0 CR 0 0 0 0 0
Delimiter
Error code
CR OK
Delimiter
CR ER
Delimiter
FQ2-S_CH_comm.book 282 ページ ２０１４年６月２６日 木曜日 午前１１時４７分