Omron FQ2-S Series User Manual

Command Control
302
FQ2-S/CH User’s Manual
for Communications Settings
TOTALDATA or TD
Acquire Statistical Data
Acquires the statistical data (such as the number of measurements, number of NG overall judgments, and
other information, since the power supply was turned ON) possessed by the Sensor.
The following types of statistical data are available. Specify the data to be read from these types with this
command.
•Number of measurements since the power supply was turned ON
•Number of OK overall judgments
•NG rate
•Number of NG judgments since the power supply was turned ON
•OK rate
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Type of statistical data to
be acquired
Specifies the type of statistical data to be acquired.
1: Number of measurements
2: Number of NG judgments
3: NG rate
4: Number of OK judgments
5: OK rate
Acquired value Returns the value of the acquired statistical data.
TO DLATA CR TA
Type of statistical data
to be acquired
(1 digit max.)
Command
Space
(0x20)
Delimiter
Delimiter
Command
or
DT
Type of statistical data to be acquired
(1 digit max.)
CR
Space
(0x20)
CR
Acquired
value
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 302 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English