Omron FQ2-S Series - Page 313

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
311
5
Appendices
DICREGIST or DR
Register Characters to Dictionary Data
This command registers characters to the specified dictionary data.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Dictionary data number Specifies the dictionary data number. (0 to 31)
String to be registered
(line 1)
String to be registered (1 to 32 characters)
Specify the strings from line 1 to line 4 according to the character format.
String to be registered
(line 2)
String to be registered
(line 3)
String to be registered
(line 4)
String to be registered (line 1)
(32 characters max.)
String to be registered (line 3)
(32 characters max.)
String to be registered
(line 2)
(32 characters max.)
String to be registered
(line 4)
(32 characters max.)
Command
Space
(0x20)
Space
(0x20)
Space
(0x20)
Delimiter
Space
(0x20)
Space
(0x20)
Dictionary data
number
(2 digits max.)
Space
(0x20)
Dictionary
data number
(2 digits max.)
Command
or
String to be registered (line 1)
(32 characters max.)
String to be registered (line 3)
(32 characters max.)
String to be registered
(line 2)
(32 characters max.)
String to be registered
(line 4)
(32 characters max.)
Space
(0x20)
Space
(0x20)
Space
(0x20)
Delimiter
Space
(0x20)
DI IST
CR
CR GE
RD
CR
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 311 ページ ２０１４年６月２６日 木曜日 午前１１時４７分