Omron FQ2-S Series User Manual

Command Control
348
FQ2-S/CH User’s Manual
for Communications Settings
TOTALDATASAVE or TDS
Saves statistical data saved in the Sensor's memory by the logging function to the SD card inserted in the
Touch Finder as csv data.
The destination for statistical data is the following fixed directory on the SD card.
\Sensor name\LOGDATA
The file name is automatically created as follows.
The date and time that make up the statistical data file name are not the date and time that the measurement
was performed, they are the date and time the statistical data file was saved from the Sensor to the Touch
Finder SD card by this command.
<Command Format>
or
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
Do not turn off power to the Vision Sensor until there is a response.
YYYY_MM_DD-HH_mm_record.csv
Date that the statistical data was saved to the Touch Finder SD card
Time that the statistical data was saved to the Touch Finder SD card
TOTALD TA V EA AS
C
R
TDS
C
R
Delimiter
CR OK
CR ER
Delimiter
Important
FQ2-S_CH_comm.book 348 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English