Command Control
FQ2-S/CH User’s Manual
for Communications Settings
371
5
Appendices
When the Command Is Not Processed Normally
<Execution command format>
This command outputs all model dictionary data in binary data format.
<Execution command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
All model dictionary data size Number of bytes of all model dictionary data to output (integer type)
All model dictionary data (binary) All model dictionary data to output (binary data)
All model dictionary data (binary)
Delimiter
CR
OK
CR
Delimiter
FQ2-S_CH_comm.book 371 ページ 2014年6月26日 木曜日 午前11時47分