Omron FQ2-S Series User Manual

Command Control
370
FQ2-S/CH User’s Manual
for Communications Settings
<Execution command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
PREDGRSAVEB (Check) / DGRSAVEB (Execute)
Outputting all model dictionary data (binary data)
This command outputs all model dictionary data in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before all model dictionary data is output in binary data format, a check is performed to determine if the data
can be received by the external device that will receive the data.
<Confirmation command response format>
When the Command Is Processed Normally
Model dictionary data number Specifies the model dictionary data number (integer type) you want to output.
Specify 0 to 31.
Model dictionary data size Number of bytes of model dictionary data to output (integer type)
Model dictionary data (binary) Model dictionary data to output (binary data)
Model dictionary data (binary)
Delimiter
CR OK
CR
Delimiter
CR ER
Delimiter
PR SAV EB CR ED RG
Delimiter
All model dictionary data size
Delimiter
CR OK
CR
Delimiter
FQ2-S_CH_comm.book 370 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English