Omron FQ2-S Series User Manual

Command Control
374
FQ2-S/CH User’s Manual
for Communications Settings
z Clear Statistical Data: 280F 00102060
This command clears the statistical data (such as the number of measurements, the number of NG overall
judgments, the NG rate, and other information since the power supply was turned ON) produced by the logging
function held by the Sensor.
Command Format
Response Format
End Codes
z Save Data in the Sensor: 280F 00103010
This command saves the current setting data (system data, scene groups, and calibration data) in the Sensor.
Format
Response Format
End Codes
MRC
(1 byte)
SRC
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F 00102060
MRC
(1 byte)
SRC
(1 byte)
MRES
(1 byte)
SRES
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F End code 00102060
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
MRC
(1 byte)
SRC
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F 00103010
MRC
(1 byte)
SRC
(1 byte)
MRES
(1 byte)
SRES
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F End code 00103010
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
FQ2-S_CH_comm.book 374 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English