Omron LD-105CT - Page 157

Chapter 10: Maintenance
Retain the M6 screws for reassembly. These are flat head, stainless screws.
3.
Disconnect the cables going to the latching assembly and sensors in the Latching Mech-
anism.
4.
Carefully lift off the top plate.
As you remove the top plate:
!
CAUTION: PROPERTYDAMAGERISK
Take care not to scratch the laser lens when removing the top plate.
At this point, you will have access to the payload bay.
14766-000 Rev H LD Cart Transporter User's Manual 157