Omron LD-105CT - Cart Latching Mechanism

Chapter 10: Maintenance
Cart Latching Mechanism
!
CAUTION: PROPERTYDAMAGERISK
The latch mechanism belt adjustment is for Omron Robotics and Safety Tech-
nologies Field Service only. Changing the belt tension can lead to premature
failure.
The acetal end of the Latching Mechanism is subject to wear, and may need replacement.
When the acetal on the cart Latching Mechanism has worn through a quarter of its original
thickness, or when either of the two screws holding the acetal block in place becomes flush
with the acetal block, the block needs to be replaced.
A
B
C
D
E
Figure 10-16. Cart Latch Mechanism with acetal block, Vertical Position
Callout Description Callout Description
A Latch Motor D Delrin Block
B Belt E Cart Latch Hook
C Pulley
NOTE: The color of the acetal block may vary.
!
CAUTION: PINCHRISK
The latch of the LD Platform Cart Transporter can pinch you if you are not care-
ful. Keep your hands clear of the Latching Mechanism when it is in action.
WARNING: ENTANGLEMENTRISK
The belt and pulley of the LD Platform Cart Transporter can entangle your
hand during maintenance. Keep your hands clear of the belt and pulley when
14766-000 Rev H LD Cart Transporter User's Manual 171