5-2 Connecting to the Host Using Controller Link
5-20
Setting Routing Tables
Routine tables that define the communications path from the local node to the network con-
nected to the destination. Routine tables must be set for the following items.
· Local node
· All relay nodes that are included for the communication path from local node to the destina-
tion
.
Make settings for routing tables on the NS-Designer. Refer to Section 7 System Settings in
the NS-Designer Operation Manual for details on setting routing tables. For details on setting
routing tables for the PLC, refer to the Controller Link Unit Operation Manual (W309).
To Next Page
Loading...
Need help?
General
