Appendix 8 Standard Models
A-31
Support Tools
Name Model Details
NS-Designer
(See note.)
NS-NSDC1-V@
DOS Computer
For Windows 95, 98, ME, NT, 2000, or XP
(Windows 98, Windows NT Ver. 4.0 Service Pack 3 or
later.)
CD-ROM
NS12-KBA04 (Anti-reflection Sheets for NS12/NS10)
NS7-KBA04 Anti-reflection Sheets for NS7
NS12-KBA05 Protective Cover for NS12 and NS10
NS7-KBA05 Protective Cover for NS7
NS-MF081 Expansion Memory Board (8 Mbytes)
NS-MF161 Expansion Memory Board (16 Mbytes)
C500-BAT08 Replacement Battery for NS12/NS10
CPM2A-BAT01 Replacement Battery for NS7
HMC-EF172 Memory Card (15 Mbytes)
HMC-EF372 Memory Card (30 Mbytes)
HMC-EF672 Memory Card (64 Mbytes)
Optional products
HMC-AP001 Memory Card Adapter (for connecting Personal Computer
PC Card Reader/Writer)
Note: The NS-Designer includes a transfer program and standard PT system program.
Reference · NEC PC98-series computers are not supported.
· Use the NEC PC98NX Series, however, in the same way as IBM PC/AT compati-
ble computers.
Connecting Cables and Connectors
Cable with Connector (PT-to-PLC)
Model
Cable
length
Applicable Units
Communications
method
Specifications
XW2Z-200T 2 m
XW2Z-500T 5 m
Units with 9-pin con-
nector and built-in 1:1
NT Link function.
NT Link
(RS-232C only)
9-pin-to-9-pin
XW2Z-200T-2 2 m
XW2Z-500T-2 5 m
CPM2C peripheral
port
NT Link
(RS-232C only)
9-pin-to-CPM2C
peripheral port
Cable with Connector (PT-to-Personal Computer)
Model
Cable
length
Applicable computer Specifications
XW2Z-S002 2 m DOS and 98NX computers Female 9-pin-to-male 9-pin
To Next Page
Loading...
