3-6 Using Memory Cards
3-26
The following message will be displayed when the PT is started up.
**ERROR: Fail in Loading System file. Since this file itself is needed to
download the System Programs, System downloading in usual way will
not be possible.
Please follow the instruction below to reinstall all your System Pro-
grams safely.
Insert the Memory Card with System Programs inside.
Touch the Screen if it is ready**
Use the following procedure to operate the PT if this message is displayed or the System
Program is damaged and the PT does not start.
1.
Copy Update_to_Ver.3.X. to a Memory Card. This program can be installed with NS-
Designer Ver. 3.0 by specifying it in the set up wizard.
2.
Place the Memory Card into the PT and turn ON the power. The recovery program will
start automatically.
Refer to the How to update or recover the system program (PDF) for details on recovery
operations. This can be started from Windows Start – Programs – Omron – NS-
Designer Ver. 3.0.
3.
The system will start automatically downloading data from bank 1 of the Memory Card to
the PT.
The indicator will flash green when the download has finished.
To Next Page
Loading...
Need help?
General
