Omron NX-SL series User Manual

2 Standard Functions
2 - 44
NX-series Safety Control Unit Instructions Reference Manual (Z931)
TIME_TO_BOOL
This function converts a TIME variable to a BOOL variable.
If you omit an input or output parameter, a building error will occur.
This function converts TIME data In to BOOL data Out.
If the value of In is 0 ms (T#0ms), the value of Out is FALSE.
If the value of In is 1 ms (T#1ms) to 49 days 17 h 2 min 47 s 295 ms (T#49d17h2m47s295ms) (i.e., not
T#0ms), the value of Out is TRUE.
To convert BOOL data to TIME data, refer to BOOL_TO_TIME.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
Instruction Name FB/FUN Graphic expression
TIME_TO_BOOL Convert TIME to
BOOL
FUN
Variables
Name I/O Description Valid range Default
In Data to con-
vert
Input Duration T#0ms to
T#49d17h2m47s295ms
T#0ms
Out Conversion
result
Output Conversion
result
TRUE or FALSE FALSE
Boolean Bit strings Integers Durations
BOOL SAFEBOOL BYTE SAFEBYTE WORD SAFEWORD DWORD SAFEDWORD INT SAFEINT DINT SAFEDINT TIME SAFETIME
In OK OK
Out OK OK
Function
Additional Information
Precautions for Correct Use
TIME_TO_BOOL

Omron NX-SL series Specifications

General

Brand	Omron
Model	NX-SL series
Category	Control Unit
Language	English