Omron NX-SL series User Manual

7
Relevant Manuals
NX-series Safety Control Unit Instructions Reference Manual (Z931)
Relevant Manuals
The information for this product is divided between two manuals as shown in the following table.
Read all of the manuals that are relevant to your system configuration and application before you use
the product. Most operations are performed from the Sysmac Studio Automation Software.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for information on the Sys-
mac Studio.
Purpose of use
NX-series Safety Control Unit
User’s Manual
NX-series Safety Control Unit
Instructions Reference Manual
Learning about Safety Control Units 
Mounting, installing, and making hard-
ware settings for Safety Control Units

Making software settings for Safety
Control Units

Creating safety programs 
Verifying and debugging safety pro-
grams

Troubleshooting Safety Control Units 
Maintaining Safety Control Units 

Omron NX-SL series Specifications

General

Brand	Omron
Model	NX-SL series
Category	Control Unit
Language	English