38
Installation Section 3-2
2. Press the S8M firmly onto the DIN Rail to mount it.
Press until the locks engage securely.
Press firmly, but carefully, to avoid damaging the S8M.
Attach an End Plate on each side of the S8M to fix it in place.
■ Recommended End Plate
Removal When removing the S8M from the DIN Rail, pull the lock lever down with a flat-
blade screwdriver and pivot the S8M upward to remove it.
PFP-M
4.8
1.3
35.5 35.3
1.8
1
1.8
10
6.2
M4 spring
washer
50
11.5
M4 × 8
Pan-head
screw
10
To Next Page
Loading...