41
Wiring Section 3-3
Wiring the External
Outputs and External
Tripping Input
The TRP, ALM, and TMP outputs operate as normally closed outputs, which
are OFF when the power is OFF, ON during normal operation, and OFF when
an error has occurred. If you want to use these external outputs as normally
open outputs, invert the signals through auxiliary relays.
The branch output is cut off when the External Tripping Input (TRG) is ON
(connected).
24 VDC Power Supply +10%/−20%
+ Terminal
− Terminal
Branch output 1
Branch output 2
Branch output 3
Branch output 4
To Next Page
Loading...