5
Precautions
• When building a system, check the specifications for all devices and equipment that will make
up the system and make sure that the OMRON products are used well within their rated
specifications and performances. Safety measures, such as safety circuits, must be
implemented in order to minimize the risks in the event of a malfunction.
• Thoroughly read and understand the manuals for all devices and equipment that will make up
the system to ensure that the system is used safely. Review the entire contents of these
manuals, including all safety precautions, precautions for safe use, and precautions for
correct use.
• Confirm all regulations, standards, and restrictions that the system must adhere to.
Trademarks
• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in
Japan and other countries for OMRON factory automation products.
• EtherCAT® is registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Other company names and product names in this Guide are the trademarks or registered
trademarks of their respective companies.
Software Licenses and Copyrights
The NJ-series CPU Units and Sysmac Studio incorporate certain third party software. The
license and copyright information associated with this software is available at
http://www.fa.omron.co.jp/nj_info_e/.
To Next Page
Loading...
Need help?
General
