Omron TJ2-MC64 - PROGRAMMING User Manual

Communication protocols
PROGRAMMING MANUAL 225
Revision 1.0
fig. 7
1. Double-click the master module in the MyNetwork tree.
2. Set the Station Address and Unit Number.
fig. 8
3. Select the Slave area tab.
4. Set the Start Address field of Output Area 1 and Input Area 1.
5. Save the project.

Omron TJ2-MC64 - PROGRAMMING Specifications

General

Brand	Omron
Model	TJ2-MC64 - PROGRAMMING
Category	Controller
Language	English