Omron TJ2-MC64 - PROGRAMMING - Page 322

Examples and tips
PROGRAMMING MANUAL 316
Revision 1.0
ENDIF
NEXT i
ENDIF
ENDIF
RETURN
'--------------------------------------------------------
monitoring:
'Add monitoring depending on the application
RETURN
'--------------------------------------------------------
absencoder:
'To be implemented in the future
RETURN
'--------------------------------------------------------
system_detection:
status_word=0
action=0
VR(status_bits)=0
'Omron Auto Generated - Units
'Warning: Automated code section - any manual code changes
'will be lost.
'Unit Variables reset
VR(diag01)=0
VR(diag02)=0
VR(diag03)=0
VR(system01)=0