Omron V1000 Quick Start Guide

2 I67E-EN V1000 Quick Start Guide
1 Safety Instructions and General Warnings
1 Safety Instructions and General Warnings
Omron Yaskawa Motion Control B.V. (OYMC) supplies component parts for use in a wide
variety of industrial applications. The selection and application of OYMC products remain
the responsibility of the equipment designer or end user. OYMC accepts no responsibility
for the way its products are incorporated into the final system design. Under no circum-
stances should any OYMC product be incorporated into any product or design as the exclu-
sive or sole safety control. Without exception, all controls should be designed to detect faults
dynamically and fail safely under all circumstances. All products designed to incorporate a
component part manufactured by OYMC must be supplied to the end user with appropriate
warnings and instructions as to the safe use and operation of that part. Any warnings pro-
vided by OYMC must be promptly provided to the end user. OYMC offers an express war-
ranty only as to the quality of its products in conforming to standards and specifications
published in the manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS
OFFERED. OYMC assumes no liability for any personal injury, property damage, losses, or
claims arising from misapplication of its products.
 General Warnings
The following conventions are used to indicate Safety messages in this manual:
WARNING
• Read and understand this manual before installing, operating or servicing this drive.
• All warnings, cautions, and instructions must be followed.
• All work must be performed by qualified personnel.
• The drive must be installed according to this manual and local codes.
• Heed the safety messages in this manual.
The operating company is responsible for any injuries or equipment damage resulting from
failure to heed the warnings in this manual.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a property damage message.

Omron V1000 Specifications

General

Cooling Method	Fan cooling
Enclosure Rating	IP20
Communication	Modbus RTU
Output Power	0.4-15kW
Output Frequency Range	0 to 400 Hz
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Supply Voltage	200-240V AC (3-phase)