Omron V600 Series Operation Manual

Appendix DConformity to Standards
115
• Read/Write Heads
V600-H j j-j
I II III IV
I – V600: Inductive Identification System
II – H: Read/Write Head
III – j: Shape – 0 or 1 Square type
– 5 Cylindrical type
IV – j : Serial number
V – j : Blank – Standard model
Suffix(es) – For marketing purposes
V
• Data Carriers
V600
-D j j j-j
I II III IV
I – V600: Inductive Identification System
II – D: Data Carrier
III – j: Memory Capacity – 2 2K bytes
– 8 8K bytes
– 23 256 bytes
IV –
j : Memory type – K SRAM
– P EEPROM
V – j : Serial number
VI – j : Blank – Standard model
Suffix(es) – For marketing purposes
VVI
FCC (Federal Communications Commission)
FCC Part 15 Subpart B
For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar
statement placed in a prominent location in the text of the manual:
Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter -
ference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual,
may cause harmful interference to radio communications. Operation of this equipment in a resi -
dential area is likely to cause harmful interference in which case the user will be required to correct the inter -
ference at his own expense.

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C