22
Section 2
2.2 Link unit: Model V700-L11
V700-L21
User's Manual
Section 2
Unit Specifications
(2) Multiconnection port
• Recommended cable
RS-485 signal line: Tatei Densen MVVS 2CX0.5SQ
Frame ground line: Cable rated at AWG 22 to 20
• Recommended compression ring
Phoenix Contact AI0.5-8WH
* The following product is recommended as a compression ring for connecting two cables to one
terminal.
Phoenix Contact AI-TWIN2×0.5-8WH
Use the product below as a crimping tool for crimping the compression ring.
Phoenix Contact CRIMPFOX UD6
Characteristic Specification
Connector specification 5-pin special connector (built into the link unit)
Communication standard RS-485
Baud rate 38400, 19200, 9600, 4800 bps (selectable with DIP-SW)
Total cable length 50 m max.
(Pin arrangement)
Pin No. Name Comment
5 − Internally connected to pin 2.
4 + Internally connected to pin 1.
3 GR Frame ground
2 − Internally connected to pin 5.
1 + Internally connected to pin 4.
1
5
Compression ring Cable
Insert the cable and crimp.
To Next Page
Loading...
