Omron V700-D23P41 - IDR;W Head: Model V700-HMD13; Names and Functions of Various Components;Specifications

25
V700-L21
User's Manual
Section 2
2.3 IDR/W head: Model V700-HMD13
Section 2
Unit Specifications
2.3 IDR/W head: Model V700-HMD13
2.3.1 Names and functions of various components/specifications
● Antenna section
This section reads or writes data from or into an ID tag.
● Mounting bracket
This bracket is for securing the antenna section. The vertical position of the mounting bracket can be
adjusted in a range of 0 to 45 mm.
● I/F connector
This interface connector supplies power to IDR/W head, and permits data transmission with an
upstream controller.
■ General specifications
* Be sure to ground the sheet metal that accepts the IDR/W head by class D earth work (grounding
resistance of 100 Ω or less, diameter of grounding conductor of 1.6 mm or greater).
Characteristic Specification Comment
Supply voltage 5 VDC±5% Supplied from the I/F connector
Current consumption 400 mA max. When 5 VDC is input: approx. 8 A with rush current
Dimensions 44.8 × 149.8 × 73 mm Except for cable
Cable length 1 m (dia. 6 mm) Can be extended to 4 m in conjunction with Model V700-L11
Protection class IP30 (per IEC 60529)
Operating ambient
temperature
0 to +40°C No freezing
Operating ambient
humidity
35 to 85%RH No dew condensation
Storage ambient
temperature
−15 to +50°C No freezing
Storage ambient
humidity
35 to 85%RH No dew condensation
Mounting system Screwed down at four points. Capable of mounting to sheet metal*
Communication area
Mounting bracket
I/F connector
I/F cable
Antenna section
1m