Omron V700-D23P41 - Dimensional Drawing and Mounting Method

32
Section 2
2.4 IDR/W head: Model V700-HMD11-1
V700-L21
User's Manual
Section 2
Unit Specifications
2.4.3 Dimensional drawing and mounting method
■ Mounting method
(1) Front mounting
(2) Back mounting
Insert the enclosed nuts into areas A, and mount the head.
* Be sure to limit the tightening torque for the M4 screws to 1.2 N-m or less.
Do not apply an organic solvent such as thread glue to the threads. Otherwise, cracking can
occur on the case.
Model V700-HMD11-1
Case material ABS resin (Unit: mm)
Filler resin Epoxy resin
Cable PVC (oil-resistant)
Lock screw
6, length 1000
(mounting hole)
2- 4.5
2- 10
4-R1
40
5
23
11
28 0.1
27 65
53 20
Status indicator
10
32
15
45.5
5
13
18
Center of coil
2-M4
28
0.2
4
0
53
27
Nut
A
Center of coil
2- 4.5
28 0.
2
27