Omron V700-D23P41 - Operating Conditions

60
Section 4
4.5 Operating conditions
V700-L21
User's Manual
Section 4
SECS Protocol Specifications
4.5 Operating conditions
The acknowledge messages and acknowledge codes (SSACK) for various states are listed below:
State
Initializing
Operating
Maintenance
Message Function IDLE BUSY
S1,F1 Online Request S1,F0 S1,F2 S1,F2 S1,F2
S18,F11 Write ID S18,F0 S18,F0 S18,F0 NO
S18,F7 Write Data S18,F0 NO NO S18,F0
S18,F3 Set Attribute S18,F0 NO NO NO
S18,F13(Reset) Reset S18,F0 NO NO NO
S18,F9 Read ID S18,F0 NO NO NO
S18,F5 Read Data S18,F0 NO NO S18,F0
S18,F13(Perform Diagnostics) Diagnostics S18,F0 NO NO NO
S18,F13(Get Status) Get Status S18,F0 NO NO NO
S18,F1 Get Attribute S18,F0 NO NO NO
S18,F13(Change State) Change State(to MT) S18,F0 NO S18,F0 S18,F0
S18,F13(Change State) Change State(to OP) S18,F0 S18,F0 S18,F0 NO
S18,F13(Change State) Change State(to PS) S18,F0 NO S18,F0 NO