Omron V700-D23P41 - Dimensional Drawing and Mounting Method

24
Section 2
2.2 Link unit: Model V700-L11
V700-L21
User's Manual
Section 2
Unit Specifications
2.2.3 Dimensional drawing and mounting method
* Be sure to limit the tightening torque for the M4 screws to 1.2 N-m or less.
Do not apply an organic solvent such as thread glue to the threads. Otherwise, cracking can occur
on the case.
Case material PC/ABS resin (Unit: mm)
110
41.5
41.3
20.3
65
4
2- 4.5
Mounting holes
2-M4 OR 4.2
35.2
60
4
55
100
4 Status indicators
ID port connector
RS-232C connector
RS-485 connector