34
Section 2
2.5 ID tag: Model V700-D23P41
V700-L21
User's Manual
Section 2
Unit Specifications
2.5 ID tag: Model V700-D23P41
2.5.1 Dimensional drawing and specifications
■ General specifications
■ Dimensional drawing
Characteristic Specification
Memory capacity 240 bytes (user area)
Memory type EEP-ROM
Data retention time 10 years after data writing
Number of overwrites 100,000 times per address
Operating ambient temperature −25 to +70°C (no freezing)
Operating ambient temperature −40 to +110°C(no freezing)
Storage ambient temperature −40 to +110°C (no freezing)
Operating ambient humidity 35 to 95%RH (no dew condensation)
Protection rating( IEC 60529) IP67
Vibration resitance Endurance 10 to 2000 Hz, single amplitude 0.75 mm
Acceleration of 150 m/s
2
is applied in each of X, Y and Z directions each for 15 minutes, and
this sequence is repeated 10 times, thereby the ID tag must not develop any irregularity.
Shock resistance An impact, that is, acceleration of 500 m/s
2
, is applied three times in each of X, Y and Z
directions, and this sequence is repeated 18 times, thereby the ID tag must not develop any
irregularity.
Materials Case: PBT resin, filler: epoxy resin
Mass Approx. 1 g
The ID tag Model V700-D32P41 has directionality, and its communication performance varies
depending on how it is oriented. Therefore, be sure to use it in correct orientation.
Toward IDRW head
25 0.1
3.9 0.1
R1
R0.25
To Next Page
Loading...
