Omron VARISPEED V7 User Manual

6 Programming Features
173
Example: Writing Constants from EEPROM in Operator to Inverter
A setting range check and matching check for the written constants are
executed after the constants are written from the Digital Operator to the
Inverter. If a constant error is found, the written constants are discarded
and the constants stored before writing are restored.
When a setting range error is found, the constant number where an error
occurs is indicated by flashing.
When an inconsistency in the settings is found, (: a number)
is indicated by flashing.
Explanation Operator Display
• Enable the set-
tings for con-
stants n001 to
n179.
• Press and
will light.
• Press to dis-
play the set value.
• Change the set value to 4
by pressing the or
key.
• Press .
(May be a different constant number)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant number is displayed.)
• Execute write-
in (COPY)
using the Con-
stant Copy
Function
Selection
(n176).
• Change the constant No.
to n176 by pressing the
or key.
• Press to dis-
play the set value.
• Change the set value to
CPy by pressing the or
key.
• Press .
• Press or
.
(Lit)
(Lit)
(Flashes while executing the
copy.)
↓
(End is displayed after the
copy has been completed.)
(The constant number is displayed.)
DSPL
PRGM
ENTER
ENTER
ENTER
ENTER
DSPL
ENTER

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English