180
Note: While rEd, CPy, or vFy is flashing, key input on the Digital Operator is
disabled. While rEd, CPy and vFy are not flashing, pressing or
redisplays the constant number.
Flashes: A communications error occurred be-
tween the Inverter and the Digital Op-
erator.
Check the connection between the Inverter
and Digital Operator.
If a communications error occurs during the
READ operation or writing (COPY) operation,
always re-execute the READ or COPY.
Operator
Display
Description Corrective Action
DSPL
ENTER
To Next Page
Loading...
Need help?
General