4
RECEIVING THE PRODUCT
MOUNTING
(Ref. page)
• Do not install or operate any Inverter that is
damaged or has missing parts.
Failure to observe this caution may result in injury or
equipment damage.
18
(Ref. page)
• Lift the Inverter by the heatsinks. When moving
the Inverter, never lift it by the plastic case or the
terminal cover.
Otherwise, the main unit may fall and be damaged.
23
• Mount the Inverter on nonflammable material
(i.e., metal).
Failure to observe this caution may result in a fire.
23
• When mounting Inverters in an enclosure, install
a fan or other cooling device to keep the intake
air temperature below 50 °C (122 °F) for IP20
(open chassis type), or below 40 °C (105 °F) for
NEMA 1 (TYPE 1).
Overheating may cause a fire or damage the Inverter.
23
• The V7AZ generates heat. For effective cooling,
mount it vertically.
Refer to the figure in Choosing a Location to
Mount the Inverter on page 24.
24
CAUTION
CAUTION
To Next Page
Loading...
Need help?
General