Omron ZEN Communications Manual

SECTION 2 CompoWay/F Communications Protocol
32
● Response Code
Normal Completion
Error Occurred
■ Operation Command
This service switches between RUN and STOP.
Service Request PDU
Service Response PDU
● Command Code and Related Information
● Response Code
Normal Completion
● Operation Commands and Precautions
Response
code
Name Description
0000 Normal completion No errors were found.
Response
code
Name Description
1001 Command too long The command is too long.
2203 Operation error Unit error (Memory error occurred,
or unused command was sent.)
MRC SRC
3005
2222
00
Com-
mand
code
Related
informa-
tion
MRC SRC
3005
22 4
Response
code
Command
code
Command content Related information
00 RUN/STOP 00: Switch to RUN
01: Switch to STOP
Response
code
Name Description
0000 Normal completion No errors were found.
Response
code
Error name Cause
1001 Command too long The command is too long.
1002 Command too short The command is too short.

Omron ZEN Specifications

General

Display	LCD
Mounting Type	DIN Rail
Operating Temperature	-10 to 55°C
Power Supply Voltage	100-240V AC
Output Type	Relay, Transistor
Number of Outputs	4-8
Programming Language	Ladder Logic