Ratings/Specifications Section 6-1
151
3. Linearity: The linearity is given as the error in an ideal straight line for
the displacement output when measuring the standard reference
object. (The linearity value varies with the object being measured.)
The standard reference object is white ceramic.
4. Temperature characteristic: The temperature characteristic is mea-
sured at the measurement center with the Sensor and sensing object
(standard reference object) secured with an aluminum jig.
5. Highly reflective objects can result in incorrect detection outside the
full scale of measurement range.
Z157-E1-01C.book Page 151 Thursday, August 31, 2006 5:13 PM
To Next Page
Loading...
Need help?
General
